Free Manual

User's Manual of the Gigabyte GA-73PVM-S2H

Make sure that the motherboard supports memory. It is recommended that memory of the same capacity, brand, speed, and chips are used. (Visit the website of GB for the latest list of supported memory.)Always turn off the computer and unplug the power cord from the power outlet before installing memory, to prevent damage to the hardware memory modules are foolproof design. A memory module may be installed in only one direction. If you cannot insert a memory switch direction.
CPU_FAN/SYS_FAN (fan headers) The motherboard has a 4-PIN CPU fan header (CPU_FAN) and 4-PIN system fan header (SYS_FAN). Each fan header supplies + 12V voltage of energy and has a foolproof insert design. When you connect the fan cable, be sure to link it in with the correct orientation. Most of the fans are designed with a color-coded power connector wires. Red power connector cable shows a positive relationship and required + 12V voltage. The black connector wire is wire to the ground. The motherboard supports CPU fan speed control, which requires the use of the CPU fan with design to control the fan speed. For optimum heat dissipation, it is recommended that the fan system is installed in the Interior of the chassis
IDE (IDE connector)
IDE connector support up to two IDE devices such as hard disks and optical disks. Before you can attach the IDE cable, find foolproof groove of the connector. If you want to connect two IDE devices, do not forget to set the jumpers and cabling according to the role of the IDE devices (for example, master or slave). (For information about how to configure master/slave settings for the IDE devices, read the instructions from the manufacturers of the device.)
User's manual download Gigabyte GA-73PVM-S2H