Free Manual

Samsung TX-S3080WH Samsung

Connect a HDMI cable between the [HDMI] or [HDMI in 1, 2] Tv and HDMI, DVD player/digital set-top box field or connect the DVI HDMI cable or DVI-HDMI adapter between the [HDMI] or [HDMI in 1, 2] jack on the TV and the DVI Jack on the DVD player/digital set-top box field.

If connecting via HDMI/DVI, should also connect the audio cables. Connect the audio cables between the rosettes AV in 1 [L-AUDIO-R] on the TV and audio jacks of the DVD player/digital set-top box field.

Remember the channels

TV may collect and store all available channels to both "Studio" (air) and cable channels. After the memorized channels are available, use the CH up or Dn CH to scan for channels. This eliminates the need to change channels by entering the channel numbers. There are three steps to remember channels: select the source of radiation to remember channels (automatic) and adding and deleting feeds (manually).

Setup of the remote control to operate your VCR

Turn your VCR. press VCR on the remote control TVs. press to set the TV's remote control. by using the number buttons on the remote control, enter three digits of the code of the VCR listed on page 20 of this guide for your brand to the VCR. Make sure that you enter three digits of the code, even if the first digit is "0". (If more than one code is in the list, try this first.)Press the power button on the remote control. Your VCR should include, if your remote is set up correctly. If you r VCR is not included after installation, repeat steps 2, 3 and 4, but try one of the other codes listed for your brand to the VCR. If there is no other codes are listed, try each VCR code 000 by 080.

SRS TruSurround XT set

SRS TruSurround XT is a patented technology that solves the problem of playing 5.1 mnogokanalna content over two speakers. TruSurround delivers compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all mnogokanalna formats.