Free Manual

Uniden GRANTLT CB Radio Manual

Elimination of Licensing the FCC has ruled that CB Radio Service operators are no longer required to obtain an FCC License to operate their CB equipment. In doing so, the FCC also decided to permit CB station operation without station identification. Elimination of individual station licenses does not reduce the operating privileges or responsibilities of CB users. An operator of a CB radio station is still required to comply with the Communications Act and with the rules of Citizens Band Radio Service. MOUNTING THE MICROPHONE HANGER Mount the microphone hanger to the side of the radio. Mounting holes are provided near the microphone connector and on the other side of the unit. Use the screws supplied. You can also mount the hanger on the dashboard, if preferred.CONNECTING THE POWER CORDSCheck the vehicle battery connections to determine which battery terminal (positive or negative) is grounded to the engine block or chassis. Most of today’s vehicles use a negative ground. If your vehicle has a negative ground, follow steps 2 and 3.Connect the RED wire of the DC power cord to the accessory contact in your vehicle’s +13.8 VDC fuse box.Connect the BLACK wire of the DC power cord to the negative side of the automobile (usually the chassis).

Connecting an External Speaker (Optional)

Connect an optional external speaker to the External Speaker Jack on the rear of the transceiver. For the external speaker, use an 8W speaker with at least a 4-watt rating. When connected, the external speaker automatically disables the internal speaker. The external speaker will provide high performance remote receiver monitoring

Download Uniden GRANTLT CB Radio Manual