Tuesday, July 3, 2012
2006-2011 Yamaha Apex Moto-r Kill Installation Instructions Manual in PDf
2006-2011 Yamaha ApexMoto-r Kill Installation InstructionsIncluded Parts:1 – Moto-r Kill wiring harness including Pro Armor tether switchStep 1Remove hood, side panels, chrome riser bezel, and headlight assembly as per service manual.Step 2Locate and remove the plastic shroud that covers the upper steering bushing and steering stop.Step 3Locate and open the wiring cover located just forward of the fuel tank on the clutch side of the sled.
Step 4Unplug the black two lead plug that has a red & a brown wire on the sled side of the plug (yellow arrow)and a brown-brown/white on the handlebar side of the plug (green arrow) .Step 5OEM Kill switch enabled(See pictures below)Plug in the female OFT Moto-r Kill’s white OEM style connector to the harness coming in from sled (red/brown wires – yellow circle). Plug the remaining male Moto-r Kill harness connector into the OEMconnector that goes to the handlebar kill switch
Download 2006-2011 Yamaha Apex Moto-r Kill Installation Instructions Manual
