Free Manual

Uniden PRO340XL CB Radio Manual

Align the two keys on the PRO340XL antenna connector with the key slots in the base of the flexible antenna.Push the base of the flexible antenna down onto the antenna connector.Twist the base clockwise to lock the antenna in place When the batteries become weak, the BATT LOW LED will light. Be sure to replace the batteries as soon as possible. You can preserve battery power by selecting the “LOW” position on the HI/LOW switch. The “LOW” setting has a substantially shorter transmission range.

The PRO340XL is designed to operate with maximum 12 volt DC power. Power can be supplied through 10 AA, 1.2 volt, rechargeable nickel-cadmium batteries; 8 AA, 1.5 volt alkaline batteries; or through the supplied cigarette lighter power cord when connected to a vehicle’s 12 volt negative ground power system.

All channels, except channel 9, may be used for normal communication. Channel 9 is reserved by the FCC for emergency communications involving the immediate safety of individuals or the protection of property. Channel 9 may also be used to render assistance to a motorist. This is an FCC rule and applies to all operators of CB radios.

Recharging Batteries

You can recharge nickel-cadmium batteries while they are installed in the PRO340XL. Use the included Cigarette Lighter Power Cord or an optional AC Adapter (AD140U). Be sure to observe the polarity of the Adapter before connecting it to the radio

Download Uniden PRO340XL CB Radio Manual