Free Manual

Guide to information for the product of the Epson Perfection 3200 PRO scanner

Before scanning transparent documents, you must remove the scanner reflecting the document mat; This compromises the scanner transparency unit (light source), which is built into the lid. If the scanned slides or film strips, esu, one of the holders of the film.With the help of the transparency unitTo use the transparency unit, you must remove the reflecting the document Mat grasping of the upper Bay, sliding up Ghent. Make sure that the cable for the transparency unit is included in the circular connector. If not, turn off the scanner, and then connect the cable as shown. You may need to increase the scanner cover and twist the cable to insert it. Use of the holders of film The film has two sides, shiny basis party and killed emulsion side. In the main part of the film is the movie name and ID number of the film, printed on it. Place the holder with a film scanner. Check the White points of the triangle in the upper-right corner of the table in the document on the scanner.

If you need to manually adjust the settings in the EPSON scan, follow the directions displayed on the right. Illustration shows EPSON scan (the Professional) in the preferred order in which settings should be adjusted. Detailed descriptions are given in reference.

Follow the instructions on the screen to use the options on the smart Panel. Very smart panel screen you need to click "Finish" to continue to scan and start to run other programs. Read the user guide of your on-screen smart panel for detailed instructions.

Download Epson manual for information on the product of perfection 3200 PRO scanner