Free Manual

Uniden PC68ELITE CB Radio Manual

Set the switch to CH9 or turn Channel Selector knob to Channel 9.Press the microphone PTT switch and speak clearly.If there is no response, select an active channel and ask that party to relay your emergency broadcast on Channel 9.All channels, except Channel 9 may be used for normal communication. Channel 9 is reserved by the FCC for emergency communication involving the immediate safety of individuals or protection of property. Channel 9 may also be used to render assistance to a motorist.

MOBILE STATION INSTALLATION Select a location that is convenient for operating the radio, but does not interfere with the driver or passenger.Install bracket with self-tapping screws provided.Connect wiring. (See instructions for Connecting the Power Cords.)Attach the microphone bracket to the side of the radio.Attach radio to bracket

CONNECTING THE POWER CORDS

We recommend connecting the power lead to the Ignition Switch Accessory Terminal. This way, the transceiver is automatically turned off when the ignition switch is turned off.

Or, the power cord may be connected to an available terminal on the fuse block, or, to a point in the wiring harness. However, caution must be taken to prevent a short circuit. If in doubt, contact your vehicle dealer for information.

Download Uniden PC68ELITE CB Radio Manual